Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
---|---|---|
Article Number | 03004 | |
Number of page(s) | 5 | |
Section | Multifunctional and Advanced Materials | |
DOI | https://doi.org/10.1051/e3sconf/20186703004 | |
Published online | 26 November 2018 |
Synthesis of composite Li4Ti5O12 nanorods/Sn-AC as anode material for lithium-ion battery
1
Department of Metallurgy and Materials, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia
2
Center for Research of Physics, LIPI, Puspitek Serpong, Indonesia
* Coresponding author: anne@metal.ui.ac.id
LTO or Li4Ti5O12 (lithium titanate) is a compound that is used as an anode component in a lithium-ion battery. LTO anode is used because it has zero-strain properties and doesn't produce SEI (solid electrolyte interphase) which cause low battery performance. However, LTO also has a problem, which is its low capacity. To overcome this problem, the LTO needs to be combined with other materials that have high capacity, which, in this case, are active carbon (AC) and Sn. Making the LTO to be nano-sized can also improve the performance of the battery, thus we tried to synthesize LTO in nanorods form. LTO nanorods are synthesized by hydrothermal in NaOH 4 M solution. The LTO nanorods are mixed with various Sn (5wt%, 10wt%, and 15wt%) and 5wt% activated carbon. LTO nanorods/Sn-AC composite was characterized using XRD, SEM-EDS, and BET and the battery performance was analyzed by EIS, CV, and CD. The results showed that the highest capacity was obtained at LTO nanorods-AC/15wt% Sn with 127.24 mAh/g. This result shows that LTO nanorods-AC/15wt% Sn could be used as an alternative for anode component.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.