E3S Web Conf.
Volume 73, 2018The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|Number of page(s)||3|
|Section||Environmental Technology and Pollution Control|
|Published online||21 December 2018|
The Extent of Damage Identification Method Using Extrusion Machine Overall Equipment Effectiveness (OEE) in PT. XYZ
1 Department of Mechanical Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan - Indonesia
2 Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Medan - Indonesia
* Corresponding author: email@example.com
PT. XYZ was a company that has been producing many different type of a pipe, the PVC (Poly Vinyl Chlorida) pipe, the HDPE (High Density Polyethylene) pipe and the gutters pipe that used for clean water irrigation, the pipe installation of housing complex, the industrial waste disposal, for reservoirs and telecommunication. The process of making a pipe is often hampered on an extrusive engine because it used during 24 hours a day and the maintenance schedule of the machine has not been applied regularly. We need to do identification about the damages of exstrusive machine with a Total Productive Maintenance using the Overall Equipments Effectiveness (OEE) method. From the research, it can be seen that the set up time to an extrusive machine still took a long time and the production volume of the machine was still low. The effectiveness of the performance from extrusive machine also have not been able to achieve the OEE's standard that was 88 % .
Key words: Workload / Hearth Rate / Oxygen Consumption
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.