Issue |
E3S Web Conf.
Volume 79, 2019
International Symposium on Architecture Research Frontiers and Ecological Environment (ARFEE 2018)
|
|
---|---|---|
Article Number | 01016 | |
Number of page(s) | 4 | |
Section | Analysis of Architecture Materials Performance and Landscape Design | |
DOI | https://doi.org/10.1051/e3sconf/20197901016 | |
Published online | 15 January 2019 |
Analysis of dynamic characteristics of climbing formwork under wind loads
1
College of Mechanical and Electrical Engineering of Central South University, Changsha 410000, China
2
State Key Laboratory of high performance complex manufacturing, Changsha 410000, China
This article took the climbing formwork which constructed on the bridge at a height of 100 meters as the prototype, then established the finite element model and conducted modal analysis. The APDL language is used to load the wind load which is simulated by the Matlab programming then calculated the displacement and acceleration responses of the climbing formwork and further. The results show that the bending effect of the climbing formwork is more obvious. This calculation method of calculating the wind load, improve the anti-wind design method of the climbing formwork.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.