| Issue |
E3S Web Conf.
Volume 87, 2019
1st International Conference on Sustainable Energy and Future Electric Transportation (SeFet 2019)
|
|
|---|---|---|
| Article Number | 01013 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/20198701013 | |
| Published online | 22 February 2019 | |
DSTATCOM with Improved LMS based IRP theory
1 2 Department of Electrical and Electronics Engineering, Vignan institute of Technology and Science, Deshmukhi
3 Department of Electrical &Electronics Engineering, Osmania university college of Engineering, Hyderabad
In this paper, grid connected DSTATCOM with three phase three wire has been proposed for harmonics elimination, reactive power compensation and active power injection into the grid. An improved instantaneous reactive power theory based on the least mean square is computed. The least mean square (LMS) algorithm is combined with instantaneous reactive power theory (IRPT) to improve its dynamics performance and eliminates the use of low pass filter requirement for computation of reference current. The harmonics component of the active power is estimated from LMS algorithm generated load harmonics currents. The performance characteristic of DSTATCOM is estimated with control scheme using computer simulation. The technique is based on the instantaneous transformation of instantaneous signals and taking advantage of the subsequent calculation of power from supply side to the loads. The neural network based method to estimate the harmonic online, DSTATCOM can compensate the harmonics. The computer simulation is carried out with MATLAB Simulink power system block sets.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.