| Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 8 | |
| Section | Smart City | |
| DOI | https://doi.org/10.1051/e3sconf/20199701017 | |
| Published online | 29 May 2019 | |
Application of anoxic phase in SBR reactor to increase the efficiency of ammonia removal in Vietnamese municipal WWTPs
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: haquan.891300@gmail.com
Process removal nutrients, especially nitrogen – ammonia in municipal wastewater treatment is a challenger of design and operate wastewater treatment plant. Nowadays in Vietnam, technology SBR has been wide applied in biological wastewater treatment but the concentration of nitrogen – ammonia in treated water cannot achieve the discharge standard. For the purpose to reach the Vietnamese Standard A, the modification of SBR has been added the anoxic phase into operated cycle to create the denitrification’s environment and enhance performance of ammonia – nitrogen removal in municipal wastewater treatment at present and in the near future. The results of experiment shows that, the efficiency of N – NH4 removal in reactors sustainable in range 75 – 80% with the nitrogen loadings rate from 0.07 – 0.25 kg N – NH4/kg sludge/d. However, in 3 hours of anoxic phase, the value of specific denitrification rate is 0.10 – 0.15 kg N – NO3/kg sludge/d with the organic loadings rate in range 0.3 – 1.0 kg BOD/kg sludge/d and can reach the maximum is 0.2 kg N – NO3/kg sludge/d when the organic loadings rate increase to 2.0 kg BOD/kg sludge/d.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.