| Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
|---|---|---|
| Article Number | 01039 | |
| Number of page(s) | 6 | |
| Section | Smart City | |
| DOI | https://doi.org/10.1051/e3sconf/20199701039 | |
| Published online | 29 May 2019 | |
Usage of thermal isolation systems for low-rise buildings as a component of information models
Moscow State University of Civil Engineering, 26 Yaroslavskoye Sh., Moscow, 129337, Russia
* Corresponding author: gudkovpk@mgsu.ru
The article discusses the possibility of using the criteria of energy saving, cost and comfort as an estimate criterion in the analysis of information modeling technologies for low-rise buildings at the stages of design, implementation and operation. The insulation systems of low-rise buildings, including frame type, are considered as an object of study.
Different types of insulation systems of frame buildings are considered and, as a result, the expediency of using rolled polyethylene foam as an insulating material is established. Its use allows to form a seamless insulating sheath with minimization of heat transfer bridges, as well as to eliminate the use of additional wind-proof and vapor-insulating membranes.
The regularities of the influence of operating factors on the thermal resistance of the insulating shell are established. The data obtained as a result of the implementation of experimental studies allow us to state that low water absorption and low vapor permeability of the insulating layer exclude the possibility of its wetting and degradation of heat-shielding parameters. The stability of the properties of the insulation sheath and the construction of the walls as a whole is ensured during the entire period of operation.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.