Issue |
E3S Web Conf.
Volume 97, 2019
XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|
|
---|---|---|
Article Number | 06010 | |
Number of page(s) | 7 | |
Section | New Construction Technologies | |
DOI | https://doi.org/10.1051/e3sconf/20199706010 | |
Published online | 29 May 2019 |
Optimization of foamed plastic technology
1
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
2
National research University Higher school of Economics, Moscow, Russia
* Corresponding author: ser-31-16@mail.ru
Insulation systems of building structures involve the solution of the following group of tasks: creation of favorable conditions for the work of structural elements and construction as a whole; optimization of heat losses through the insulation shell; creation of comfortable conditions in the room. Such a system would function normally if effective thermal insulation, including polyethylene, were used. The price of polyethylene foam can be reduced without prejudice to the properties in the case of the use of secondary polyethylene foam. The article presents the results of experimental studies, the purpose of which is to optimize the composition of polyethylene foam with the addition of secondary polyethylene, the formation of methods of selection of its composition and the development of systems for the application of products based on polyethylene foam. The article presents the main provisions of the method of analytical optimization, which allows to significantly reducing the material and time costs of processing the results of the experiment. The article deals with aspects of the implementation of construction systems using products based on polyethylene foam in terms of minimizing heat loss through the contact areas. Mandatory criteria for the construction and implementation of insulation systems are safety conditions, including both structural safety (including maintenance-free cycle) and fire safety.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.