E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||8|
|Section||Reliability of Buildings and Constructions|
|Published online||29 May 2019|
Working capacity of aluminum alloys in structure elements
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: firstname.lastname@example.org
Mechanical properties of specimens were researched for model analysis of stress-strain behavior in the stress concentration zone for plate structures using aluminum alloys. Traditional and new structure materials including Russian (1915T and 1565ch) and foreign (6082 – Russian analogue AD35) developments with different alloyage systems (Al-Mg, Al-Mg-Si and Al-Zn-Mg accordingly), strengthening methods, corrosive resistances and welding capacities are studied. Strain and fracture resistance is shown for axial and eccentric tension and for impact bending in the temperature range from -70 to +20°C. Acquired results allow us to designate loads reasonably for structure design using aluminum alloys and estimate their durability.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.