E3S Web Conf.
Volume 97, 2019XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019)
|Number of page(s)||8|
|Section||Hydrotechnical Construction and Melioration|
|Published online||29 May 2019|
Studies of rational methods of water selection in water intake areas of hydroelectric power plants
Tashkent institute of irrigation and agricultural mechanization engineers, Tashkent, Uzbekistan
2 Saint Petersburg state electro technical university, Saint Petersburg, Russia
* Corresponding author: email@example.com
Up to 2021, 42 new hydropower stations will be created in Uzbekistan and 32 existing hydropower stations will be repaired. Hydraulic engineering designers face a number of problems with the open flow division nodes in the field, which are part of the hydraulic structures of such hydropower plants. Considering the above, the main objectives of the research were determined: a) development of a refined method for the hydraulic calculation of flow division nodes with a quiet flow regime; b) the development of methods for predicting deformation of the channel in the area of the division node. The studies were carried out using theoretical and experimental studies using the equation for changing the amount of movement, laboratory studies on a hydraulic model, field surveys of existing water intake nodes, as well as analysis of experimental data available in the literature on this issue. Based on the theoretical and experimental studies, recommendations were made for the open flow division nodes. These recommendations are valid for division nodes at a division angle not exceeding 90°, for prismatic channels of rectangular cross section with relatively small bottom slopes. These recommendations are intended for flows with values of B / H = 3 ÷7.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.