Issue |
E3S Web Conf.
Volume 105, 2019
IVth International Innovative Mining Symposium
|
|
---|---|---|
Article Number | 01009 | |
Number of page(s) | 7 | |
Section | Environment Saving Mining Technologies | |
DOI | https://doi.org/10.1051/e3sconf/201910501009 | |
Published online | 21 June 2019 |
Operational Control of the Feed of the Harvester
1
EDP Institute of Comprehensive Exploitation of Mineral Resources Russian Academy of Sciences s, Editorial Department, 111020 Krukovskiy tupik 4, Moscow, Russia
2
JSC SUEK, 115054 Dubininskay 53-7, Moscow, Russia
* Corresponding author: s_kubrin@mail.ru
Comparison of normative and actual indicators on mining testifies to inefficient work of the excavating equipment. The results of the correlation analysis of the speed of movement of the harvester relative to the section of the support with the readings of methane sensors revealed a significant dependence. When conducting mining operations in complex geological conditions at great depths, a joint step-by-step carrying out of various technological processes is required to ensure the preparation, opening and excavation of reserves and the creation of safe conditions for mining coal seams. At the same time, efforts should be made to minimize time, human and energy resources. In this regard, of particular importance is the right choice of the program of operational management of technological processes of mining, monitoring the implementation of technological operations for the timely detection of deviations from the selected mode, adjustment of the established current modes of operation of technological processes and the development, if necessary, measures aimed at reducing the risks of accidents. A promising direction of solving this problem is the use of modeling methods. The developed models of technological processes of the mining enterprise will allow planning production and supporting decision-making in the implementation of operational management.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.