Issue |
E3S Web Conf.
Volume 109, 2019
International Conference Essays of Mining Science and Practice
|
|
---|---|---|
Article Number | 00084 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/201910900084 | |
Published online | 09 July 2019 |
Defectoscope for monitoring of a concrete timbering of underground constructions
Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, 49005, Dnipro, Simferopolska Str., 2a, Ukraine
* Corresponding author: ser1953@meta.ua
The purpose of work is development of a defectoscope for nondestructive identification of spaces in rock mass on border with a concrete timbering. The principle of operation of the device consists in the analysis of parameters of vibration of a timbering after drawing blow to it. The difference from the known developments consists in contactless reception of an acoustic signal with use of the microphone. Parameters of vibration of a timbering are determined under various conditions of its contact with rock mass. Initial requirements for development of a defectoscope are experimentally defined. Its block diagram is submitted and principal specifications are given. Data on approbation of the equipment in hydraulic engineering constructions are given.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.