Issue |
E3S Web Conf.
Volume 201, 2020
Ukrainian School of Mining Engineering - 2020
|
|
---|---|---|
Article Number | 01026 | |
Number of page(s) | 11 | |
DOI | https://doi.org/10.1051/e3sconf/202020101026 | |
Published online | 23 October 2020 |
Investigation and optimization of main materials consumption when mining iron ores at deep levels of the Underground Mine Group of the PJSC “ArcelorMittal Kryvyi Rih”
1 Kryvyi Rih National University, Department of Underground Mining of Mineral Deposit, 11 Matusevycha St., 50027 Kryvyi Rih, Ukraine
2 Kryvyi Rih National University, student, Mining and Metallurgical Faculty, 11 Matusevycha St., 50027 Kryvyi Rih, Ukraine
* Corresponding author: kalinichenko@knu.edu.ua
The work considers conditions of deep levels of the Underground Mine Group for underground ore mining (as underground mines) of the Mining Department of the PJSC “ArcelorMittal Kryvyi Rih” (the PJSC “ArcelorMittal Kryvyi Rih”). The research aims to improve indicators of mined ore mass extraction when mining rich iron ores through studying and optimizing consumption of explosives, enhancing mining technology to provide fulfilment of the underground iron ore mining program. During the research, there are analyzed mining geological and technical conditions of the deposit mining as well as current technologies of iron ore mining at the Underground Mine Group of the PJSC “ArcelorMittal Kryvyi Rih”. The work analyzes the achieved indices and consumption of explosives for drilling and blasting at the Underground Mine Group. The mining geological and technical conditions of the deposit mining as well as current technologies of mining, parameters of preparatory operations, the nomenclature and qualitative characteristics of many types of explosives are determined to have changed. This complicates planning consumption of explosives and making their estimates for work sites. However, this is a reason for selecting highly efficient technology and machinery in deteriorating mining and geological conditions of operating at over 1200 m depths. The work determines dependencies of a stress value on a mining depth and physical properties of rocks, as well as parameters of drilling and blasting operations considering the stress-strain state of the massif under high rock pressure at deep levels of the Mining Group of the PJSC “ArcelorMittal Kryvyi Rih”.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.