E3S Web Conf.
Volume 111, 2019CLIMA 2019 Congress
|Number of page(s)||8|
|Section||Advanced HVAC&R&S Technology|
|Published online||13 August 2019|
Using the Hardware-in-the-Loop concept for energetic evaluation of heat generators
1 Technical University of Dresden, Institute of Power Engineering, 01062, Dresden, Germany
2 RWTH Aachen University, E.ON Energy Research Center, Institute for Energy Efficient Buildings and Indoor Climate, 52074, Aachen, Germany
* Corresponding author: firstname.lastname@example.org
Currently available energetic evaluation methods for heat pump and micro-CHP systems lead to results which partly deviate strongly from field measurements. A new evaluation method based on the Hardware-in-the-Loop concept was therefore developed and tested in a research project. The method employs representative days. A procedure for determining the representative days is presented. The functionality of the concept could be proven in a round robin test and the energetic key figures can be confirmed by values from field measurements values.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.