| Issue |
E3S Web Conf.
Volume 114, 2019
International Conference of Young Scientists “Energy Systems Research 2019”
|
|
|---|---|---|
| Article Number | 07001 | |
| Number of page(s) | 7 | |
| Section | Thermodynamics | |
| DOI | https://doi.org/10.1051/e3sconf/201911407001 | |
| Published online | 04 September 2019 | |
Research of variable characteristics of heat exchange equipment
1 Novosibirsk State University of Architecture and Civil Engineering (Sibstrin), Leningradskaya str., 113, Novosibirsk, Russia
2 Novosibirsk State University, Pirogova str., 2, Novosibirsk
Heat exchangers used in various industries, most often work in conditions of variable flows and temperatures. At the same time, the existing theories of calculation of heat exchanger modes are based on the use of constant dimensionless parameters in any mode of operation. The purpose of this work is to obtain dependencies to determine the effect of coolant temperatures on the variable parameter of the heat exchanger. Using the simulation method, dependencies were found that describe the change in the heat exchanger parameter which made it possible to obtain a general formula for the change in the heat exchanger parameter at varying coolant temperatures. To test the applicability of the existing relations describing the change in the heat exchanger parameter and the formula obtained, a large number of heat exchangers were calculated in variable operating modes. Comparison with the simulation results showed that the ratios of the known theories of heat exchangers do not work in all modes and their application can lead to significant errors. A formula has been obtained allows one to find the effect of coolant temperatures on the variable parameter of the heat exchanger. The formula can be used to predict the modes of large systems.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.