Issue |
E3S Web Conf.
Volume 118, 2019
2019 4th International Conference on Advances in Energy and Environment Research (ICAEER 2019)
|
|
---|---|---|
Article Number | 04005 | |
Number of page(s) | 4 | |
Section | Environmental Protection, Pollution and Treatment | |
DOI | https://doi.org/10.1051/e3sconf/201911804005 | |
Published online | 04 October 2019 |
Study on the Influence of Slope on Pollutant Diffusion Characteristics during Tunnel Construction Period
1.
POWERCHINA roadbridge Group CO., Ltd, 100048 Beijing, China
2.
Chongqing University, 400044 Chongqing, China
* Corresponding author: cqu_liurong@cqu.edu.cn
. The relative elevation of the beginning and end of the Jianyuan Expressway exceed 1000m. In order to overcome the impact of the large slope on traffic safety, a spiral tunnel was designed in the middle of the expressway. The tunnel length is 3970m and the radius is 710~730m with its slope being up to 2.08%. The occurrence of large slope has a great impact on ventilation and smoke during tunnel construction, but little research has been done before. In this paper, numerical simulation and field test were used to study the effect of slope on the diffusion characteristics of pollutants. It was found that as the slope increased, the wind speed and CO dilution rate also increased. However, the dust dilution characteristics were different. Especially in the case of the downward tunnel, the effect of wind speed on the sedimentation rate of dust was minimal. Simply increasing the wind speed cannot speed up the dust reduction rate.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.