Issue |
E3S Web Conf.
Volume 124, 2019
International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|
|
---|---|---|
Article Number | 02004 | |
Number of page(s) | 4 | |
Section | Electromechanics and Electrical Apparatus | |
DOI | https://doi.org/10.1051/e3sconf/201912402004 | |
Published online | 25 October 2019 |
Control Unit for Electromagnet Current
1
I. N. Ulyanov Chuvash State University, Cheboksary, Russia
2
Relematika Ltd, Cheboksary, Russia
* Corresponding author: malgrig6@mail.ru
The paper deals with the results of research and development of the electromagnet current control unit for the case when only two outputs without specifying the polarity of the source connection may be available from a circuit with a series of DC voltage sources and electromagnet winding. Theoretical results have been verified by modelling in Matlab-Simulink environment as well as by testing the starter of the contactor air switch.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.