| Issue |
E3S Web Conf.
Volume 124, 2019
International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|
|
|---|---|---|
| Article Number | 02012 | |
| Number of page(s) | 5 | |
| Section | Electromechanics and Electrical Apparatus | |
| DOI | https://doi.org/10.1051/e3sconf/201912402012 | |
| Published online | 25 October 2019 | |
On modeling on a single-winding forced valve electromagnet in a circuit with a ballast resistor
1
Kazan State Energy University, Kazan, Russia
2
Chivashsky State University named after I.N. Ulyanov, Cheboksary, Russia
3
Belarusian State Agrarian Technical University, Minsk, Belarus
* Corresponding author: pvn.chuvsu@yandex.ru
We have built a mathematical model of starting up a forced U-shaped valve electromagnet of static voltage taking into account dynamic parameters and characteristics. The offered model takes into account the influence of eddy currents in the closed circuits of the magnetic system. At the first stage we have developed a mathematical model that allows to determine optimum dimensions, to minimize the mass of active materials (the total mass of copper for windings and ferromagnetic steel), that are used in construction of the electromagnet. Then, based on a known method of integration of the dynamic equations we have obtained an actuation model of the valve magnet taking onto account equivalent resistances of cores of both circular and rectangular cross-sections. Modeling of dynamic parameters and characteristics was done taking into account secondary con-tours without increasing order of differential equations. We list calculated values of dynamic parameters and characteristics of the electromagnet in a circuit with a balance resistor.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.