Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00006 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/201912600006 | |
Published online | 30 October 2019 |
Justification of the construction automated device for hydraulic removal of weeds in horticultural
Federal Scientific Agroengineering Center VIM,
1-st Institutsky proezd, 5
Moscow,
109428,
Russia
* Corresponding author: alexeykutyrev@gmail.com
Currently, the search continues for efficient, low-energy, environmentally friendly technologies for the destruction of weeds. The practical application of an environmentally friendly method of removing weeds using high-pressure water jets is hampered by the lack of technical solutions to ensure compliance with the treatment regimes in field conditions. The article presents a device for the hydraulic removal of weeds for use in gardening. To comply with the treatment regimens when performing technological operations in the field, a system of adaptation of the spray head has been developed. The results of field studies of the developed device with the proposed automated adaptation system are given.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.