| Issue |
E3S Web Conf.
Volume 193, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2020)
|
|
|---|---|---|
| Article Number | 01040 | |
| Number of page(s) | 5 | |
| Section | Agricultural Science | |
| DOI | https://doi.org/10.1051/e3sconf/202019301040 | |
| Published online | 08 October 2020 | |
Modeling of the sowing process of row crops in laboratory conditions
Department of Agrotechnologies, Machines and Life Safety, Ulyanovsk State Agrarian University, Ulyanovsk, Russia
* Corresponding author: evg-zykin@yandex.ru
The paper discusses the process of sowing row crops (the formation of a ridge above the seeds and rolling ridges) in laboratory conditions. Taking account of the agrotechnical requirements and physical and mechanical properties of the soil, the reference profile of the soil ridge as well as the original optimization criterion have been adopted. This ridge is formed during sowing, which conditionally can be recognized as ideal. After studying the process of sowing in the tillage bin and statistical processing of the obtained data, the corresponding equations were deduced in which the independent process factors were expressed in natural and in encoded values.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.