E3S Web Conf.
Volume 128, 2019XII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2019)
|Number of page(s)||7|
|Published online||08 November 2019|
Experimental investigation on effect of helical grooves on condensation heat transfer performance of vertically oriented copper tubes
Advanced Thermo Fluid Research Lab, Department of Mechanical Engineering, College of Engineering Trivandrum,
2 Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology Kottayam, India
* Corresponding author: email@example.com
An experimental investigation was conducted to study the influence of pitch of helical grooves on condensation heat transfer performance on vertically oriented copper tubes. The condensation heat transfer coefficient of bare as well as grooved copper tubes of various pitches ranging from 2.54 mm to 22.4mm were studied. The investigation revealed that copper tube with groove pitch ≤ 6.35 mm has an adverse effecton the heat transfer performance in comparison to bare copper. The helical groove with pitch > 6.35 mm showed improvement in heat transfer coefficient. The helical groove with pitch 8.47 mm showed a maximum enhancement of 68.4% in condensation heat transfer coefficient at ∆T = 40°C.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.