E3S Web Conf.
Volume 136, 20192019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|Number of page(s)||4|
|Section||Urban Public Safety|
|Published online||10 December 2019|
Analysis of Mechanical Parameters and Creep Characteristics of Surrounding Rock in Fully Weathered Sandstone Tunnel
1 Guangdong Road and Bridge Construction Development Co., Ltd., Guangzhou, 510000, China
2 China Merchants Chongqing Communications Technology Research & Design Institute Co., Ltd, Chongqing, 400000, China
3 Chongqing Jiaotong University, Chongqing 400067, China
* Corresponding author’s e-mail: email@example.com
Based on the geological conditions of the fully weathered sandstone stratum in the expressway of the mountainous area, the Huizhou-Qingyuan section of the Yuzhan Expressway is used to analyze the mechanical parameters and creep characteristics of the surrounding rock of the tunnel through the indoor model test. It is concluded that: 1) The uniaxial compression deformation test measured the structural parameters of the fully weathered sandstone stratum structure, and obtained that the elastic modulus and internal friction angle φ of the fully weathered sandstone was 14.20°, and the cohesion c was 0.343Mpa. 2) The failure mode of fully weathered sandstone specimens was obtained by triaxial creep test. The creep curves of different weathered loads were analyzed and the Xiyuan rheological model was established. 3) The creep data was analyzed by MATLAB software, and the surrounding rock parameters under different surrounding rock were obtained.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.