Issue |
E3S Web Conf.
Volume 138, 2019
International Scientific Conference “Construction and Architecture: Theory and Practice for the Innovation Development” (CATPID-2019)
|
|
---|---|---|
Article Number | 01019 | |
Number of page(s) | 6 | |
Section | Energy and Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/201913801019 | |
Published online | 16 December 2019 |
The radiation safety of the designing constructions in radon-hazardous areas
1
Russian Academy of Architecture and Building Science Research Institute of Building Physics, 127238, Moscow, Russia
2
Southwest State University, 305040, Kursk, Russia
3
Lugansk Taras Shevchenko National University, 91011, Lugansk
* Corresponding author: kalaydo18@mail.ru
The radiation safety of the designing constructions is quite a challenge problem due to the multifactorial nature of the process of forming an internal radon situation. The particular importance is the successful solution of potentially radon-hazardous areas, where the acceptable levels of radon in the indoor air cannot be provided without implementing a set of special radon-protective measures. The article defines the dominant mechanism of radon transportation in soils and walling materials on the basis of their permeability. The recommendations for designing underground walling structures with the required radon-protective characteristics have been proposed. It is shown that radon safety of buildings can be provided on soils with a high natural radionuclides content using exclusively passive radon protection technologies.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.