Issue |
E3S Web Conf.
Volume 156, 2020
4th International Conference on Earthquake Engineering & Disaster Mitigation (ICEEDM 2019)
|
|
---|---|---|
Article Number | 02015 | |
Number of page(s) | 4 | |
Section | Geotechnical | |
DOI | https://doi.org/10.1051/e3sconf/202015602015 | |
Published online | 13 March 2020 |
Effect of use of quicklime mix on the slope surface and number of layers on embankment stability
Departement of Civil Engineering, Engineering Faculty, Andalas University, Indonesia
* Corresponding author: rina@eng.unand.ac.id
Common problems that are often found on embankments are soil instability and low soil bearing capacity. To prevent landslides, consideration of the embankment stability and ways to improvement it is essential. This study investigates the use of quicklime as a stabilising material and a number of fill layers on the safety factor of the slope of the embankment in order to find the optimal combination. The type failure or deformation and extreme stresses that occurred in these soil embankments was also studied. Laboratory testing is used to determine soil properties. Three types of soil were analysed; subgrade, fill from original soil and fill from soil mixed with 15% quicklime. This quicklime mix was used as a 40 cm reinforcement layer on the slope surface of the embankment.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.