Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
---|---|---|
Article Number | 03021 | |
Number of page(s) | 4 | |
Section | Geology, Mapping, and Remote Sensing | |
DOI | https://doi.org/10.1051/e3sconf/202016503021 | |
Published online | 01 May 2020 |
Study on the variation of physical and mechanical characteristics under freeze-thaw condition
Xi’an Research Institute, China Coal Technology and Engineering Group Corp, Shanxi, China
* Corresponding author. E-mail adresss:tianyanzhe@cctegxian.com. China. Tel: +8618706765319.
Subjected to freeze-thaw cycles, the deformation of physical and mechanical properties is the main cause of engineering disasters. Based on the analysis of the results of triaxial compression test after different freeze-thaw cycles, conclusions are drawn that: under the certain freeze-thaw cycles conditions, with the increase of confining pressure, the triaxial compressive strength, elastic modulus and the axial strain increase gradually, indicating that the failure of rock changes from brittle failure to plastic failure; in the case of same confining pressure, with the increase of the number of freeze-thaw cycles, the triaxial compressive strength,elastic modulus of rock decreases and the axial strain corresponding to peak stress gradually increase. With the increase of the number of freeze-thaw cycles, the cohesion of grit is in the form of exponentially decays to reduce,the internal friction angle changes very little.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.