E3S Web Conf.
Volume 175, 2020XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|Number of page(s)||7|
|Section||Livestock and Veterinary|
|Published online||29 June 2020|
The disinfecting properties of Penox-1 solutions for sanitation of objects of veterinary supervision
The Caspian Zonal Scientific Research Veterinary Institute a branch of the Federal State Budgetary Scientific Institution “FANZ RD”, 88, str. Dakhadaev, 367000, Republic of Dagestan, Makhachkala, Russia
* Corresponding author: firstname.lastname@example.org
In the literature there is no complete data on the use of slaked lime as a disinfectant disinfectant. All veterinary publications indicate that a 10 - 20% solution of slaked lime has a disinfecting effect. However, the technology of carrying out, as well as modes of disinfection, are not specifically indicated in any literature. There is no data on which infectious diseases they affect, at what concentration, exposure and consumption of the disinfectant it can be applied, on smooth or rough surfaces, the frequency of whitewashing or wet disinfection, etc. Until now, the issue of the solubility of slaked lime in water and other chemical compounds has not been completely resolved. In addition, the lack of a disinfectant - 10 - 20% slaked lime, is a low disinfection efficiency, high corrosion activity in relation to metal products, a large flow rate of a solution of 1 -1.5 l / m2, which is carried out 2 - 3 times by whitewash.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.