Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
---|---|---|
Article Number | 11030 | |
Number of page(s) | 5 | |
Section | Agricultural Structures | |
DOI | https://doi.org/10.1051/e3sconf/202017511030 | |
Published online | 29 June 2020 |
Preparation of modified oil road bitumen
1
Russian Technological University, Vernadsky Avenue 78, 119454, Moscow, Russia
2
Atyrau University of Oil and Gas, Baymukhanov street 45a, 060027, Privokzalnyi MD Atyrau, Republic of Kazakhstan
3
Laboratory of Engineering Profile “Petrochemistry”, Atyrau University of Oil and Gas, Azattyk Avenue 1, 060002, Atyrau, Republic of Kazakhstan
4
Ufa State Petroleum Technological University, Pr. Oktyabrya 2, 453100, Sterlitamak, Russia
* Corresponding author: karimov.oleg@gmail.com
The aim of this work is to study the possibility of developing oil road bitumen by goudron oxidation of mixed base oils with the softening temperature of 24 °C from the Martyshi and Mangistau deposits using vacuum residue of more than 450 °C of highly resinous oil from the Karazhanbas deposit of the Republic of Kazakhstan as an additive, elemental sulfur modifier and induction moments. Karazhanbas oil has a high content of oil tars (24.18 % wt.) and asphaltenes (4.85 % wt.). The oxidation of goudron and vacuum residue of highly resinous oil was carried out in a bubble reactor when thermostating at 200 - 210 °С, specific air consumption of 1.8 – 2 l/min·kg. The oxidation process of the feedstock was completed when the viscosity of bitumen was reached by the ring-andball method of 32-35 °C. Oil bitumen was obtained with the following technological characteristics: penetration at 25 °C 105 mm, melting point 51 °C, tensibility at 25 °C 67 cm, flash point 230 °C, brittle temperature minus 15 °C.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.