| Issue |
E3S Web Conf.
Volume 193, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2020)
|
|
|---|---|---|
| Article Number | 01047 | |
| Number of page(s) | 9 | |
| Section | Agricultural Science | |
| DOI | https://doi.org/10.1051/e3sconf/202019301047 | |
| Published online | 08 October 2020 | |
Trencher equipment
Siberian State Automobile and Highway University (SibADI), 644089, Omsk, Mira Ave., 5, Russia
* Corresponding author: Iateterina@mail.ru
The article reflects the results of theoretical studies aimed at improving the equipment of the chain trencher. The proposed design allows the development of trenches on the sides of the pipeline. In addition, with the help of a cutter drum equipped with a rotary mechanism, the equipment removes soil from under the repaired pipe section. To confirm the health of the proposed technical solution, calculations were made of the power of consumption on the drive chain of the work equipment and cutter drum. When developing the design, calculations were made to determine the diameter of the shaft and check the splined joint for crumpling.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.