E3S Web Conf.
Volume 212, 20202020 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2020)
|Number of page(s)||7|
|Published online||26 November 2020|
The temperature distribution in the load-bearing designs using LSTC
Brest State Technical University, 224017 Moskovskaya 267, Belarus
* Corresponding author: firstname.lastname@example.org
The article discusses wall enclosing structures based on light steel thin-walled structures using mineral wool as a heater. The aim of this work is to determine the most energy-efficient building envelope. For this, two types of steel profile were chosen: thermal profile and thin-walled steel profile. Based on heat engineering calculations, the values of their resistance to heat transfer were obtained. The analysis of the calculations revealed the most energy-efficient design.
Key words: steel profile / lightweight steel thin-walled structures / heat transfer resistance / temperature / cold bridge
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.