E3S Web Conf.
Volume 233, 20212020 2nd International Academic Exchange Conference on Science and Technology Innovation (IAECST 2020)
|Number of page(s)||5|
|Section||HCCE2020-Hydraulic, Civil and Construction Engineering|
|Published online||27 January 2021|
Research on flexural performance of damaged RC beams strengthened by FPR plates
Departments of Structural Engineering, University of Yanbian, Yanji, Jilin, 133002, China
* Corresponding author’s e-mail: firstname.lastname@example.org
Combining two technologies of pasting fiber reinforced composite board (FRP) and externally reinforced steel plate concrete structure, fiber-reinforced composite material and steel plate composite reinforced concrete structure technology can effectively improve the stress performance of concrete reinforced structure. To explore the effect of the new technology steel plate anchoring FRP slab concrete beams and the effect of different damage levels on the reinforcement effect, in this paper, the author made 3 FRP reinforced beams with damage rates of 20%, 40%, and 60%, 1 RC beam with FRP plate only and an ordinary RC beam to analyze the reinforcement effect of the new process steel plate anchored FRP plate and the bearing capacity and plastic performance of the reinforced beam with different damage rates. The results show that the new technology steel plate anchoring FRP plate reinforcement technology can effectively prevent the occurrence of early peeling failure, improve the ductility and bearing capacity of the reinforced beam, and significantly increase the utilization rate of the FRP plate; as the damage rate increases, the ultimate bearing capacity of the reinforced beam increases, but the ductility is significantly reduced.
© The Authors, published by EDP Sciences 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.