Issue |
E3S Web Conf.
Volume 252, 2021
2021 International Conference on Power Grid System and Green Energy (PGSGE 2021)
|
|
---|---|---|
Article Number | 02066 | |
Number of page(s) | 5 | |
Section | Research and Development of Electrical Equipment and Energy Nuclear Power Devices | |
DOI | https://doi.org/10.1051/e3sconf/202125202066 | |
Published online | 23 April 2021 |
Physicochemical Properties and its Variation Law of Microemulsion Phase When Microemulsion Flooding
1 Department of Petroleum Engineering, Northeast Petroleum University, Daqing China 163318
2 Key Laboratory of Enhanced Oil Recovery (Northeast Petroleum University), Ministry of Education
3 PetroChina Refining & Chemicals Company, Beijing 100007
* Corresponding author: dbwdq@126.com
The composition change of microemulsion system in microemulsion flooding will inevitably cause the change of phase behavior. Microemulsion with different phase types directly affects its performance and displacement efficiency of microemulsion flooding. Therefore, in order to accurately describe this change, this paper, starting from the composition of microemulsion, gives the physicochemical properties characterization methods of microemulsion phase density, viscosity and interfacial tension, and simulates the change of physicochemical properties of microemulsion phase caused by microemulsion entering the high water-oil ratio zone in the process of flooding. The research results are of great significance for screening microemulsion systems and determining the displacement efficiency.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.