Issue |
E3S Web Conf.
Volume 261, 2021
2021 7th International Conference on Energy Materials and Environment Engineering (ICEMEE 2021)
|
|
---|---|---|
Article Number | 02054 | |
Number of page(s) | 6 | |
Section | Energy Chemistry Performance and Material Structure Analysis | |
DOI | https://doi.org/10.1051/e3sconf/202126102054 | |
Published online | 21 May 2021 |
Influence of molding parameters on the properties of molding fuel derived form agroforestry biomass waste by pyrolysis
Miami College, Henan University, Kaifeng 475004, China
Biochar is now recognized as an excellent fuel with excellent performance in the combustion process and environmental friendness. As the main raw material of biochar, agricultural, and forestry biomass waste has a high waste rate. Therefore, researchers have conducted long-term research on the technology of generating biochar from agricultural and forestry biomass. Based on the current research and analysis of the existing molding fuel technology, the influence of different research parameters on the preparation of different biomass fuel is explored. The influences of molding temperature, molding pressure, raw material moisture content and the ratio of adhesive to toner on the performance of biomass fuel are focused on analysis. Finally, a conclusion is drawn based on the experimental data.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.