Production of solid biofuel via hydrothermal carbonization of wood shavings: Influence of biomass-to-water ratio and carbonization temperature on the fuel characteristics of dried hydrochar

¹ Agricultural and Bioresources Engineering, Federal University of Technology, P. M. B. 65, Minna, Niger State, Nigeria
² Research Faculty of Agriculture, Laboratory of Bio-production Engineering, Hokkaido University, Kita 9, Nishi 9, Kita-ku, Sapporo, Hokkaido 060-8589, Japan

Abstract

Hydrothermal carbonization (HTC) is recognised as a low temperature and efficient method for the conversion of biomass to solid biofuel. In this study, the effect of process temperature and biomass-to-water ratio (B/W) on the fuel properties of hydrochar produced from wood shavings was investigated. HTC was conducted in an autoclave using reaction temperature of 230 °C and 260 °C for 20 minutes with B/W ratio of 0.11 to 0.43. The produced hydrochars were characterised by the mass yield (MY), higher heating value (HHV), proximate and ultimate properties. The results showed that the properties of the hydrochars improved with increasing process temperature and B/W ratio. The higher heating value (HHV) increased to 26.74 MJ/kg as the severity of the reaction was increased to the process temperature of 260 °C. Also, the atomic H/C and O/C ratios of hydrochars carbonised at 230 °C and 260 °C were closed to the regions of a peat and lignite on the plotted van Krevelen diagram. Hence, the produced hydrochar has a promising potential as a sustainable solid biofuel for energy application.