E3S Web Conf.
Volume 262, 20211st International Scientific and Practical Conference “lnnovative Technologies in Environmental Engineering and Agroecosystems” (ITEEA 2021)
|Number of page(s)||6|
|Section||Innovative Technologies, Engineering Systems and Energy in the Agro-industrial Complex|
|Published online||24 May 2021|
Mathematical model for calculating the parameters of machines for processing near-trunk strips in a terrace
Kabardino-Balkarian State Agricultural University named after V.M.Kokov, Lenin Avenue, 1V, 360030 Nalchik, Russia
* Corresponding author: email@example.com
Horticulture is one of the most dynamically developing branches of agricultural production. In recent years, in the Russian Federation, there has been an annual increase in the area for gardens, including on sloping lands, gross harvest and good yield. In the conditions of the foothill zone of the North Caucasus, the most promising direction is the development of slope lands, with favorable soil and climatic conditions for the cultivation of fruit crops. The design features of the terraces impose restrictions on the operating conditions of agricultural units, among the many it is necessary to emphasize the possibility of approaching the row line for processing the near-trunk circle from only one side. Most of the horticultural businesses have mainly equipment designed for work in flat gardening conditions, which for complete processing requires the passage of the unit along each side of the row line that cannot be provided in terraces. A design technology scheme of the machine working tool is proposed, the technical result of which lies in the performance of a high-quality processing in the zone of the near-trunk circle by ensuring the bypass of rotors with cutting segments around the tree trunk, without its damaging, in one passage of the unit along the row line.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.