| Issue |
E3S Web Conf.
Volume 262, 2021
1st International Scientific and Practical Conference “lnnovative Technologies in Environmental Engineering and Agroecosystems” (ITEEA 2021)
|
|
|---|---|---|
| Article Number | 01029 | |
| Number of page(s) | 7 | |
| Section | Innovative Technologies, Engineering Systems and Energy in the Agro-industrial Complex | |
| DOI | https://doi.org/10.1051/e3sconf/202126201029 | |
| Published online | 24 May 2021 | |
Optimization of parameters and operating modes of a biomethane installation for maximum biomethane discharge
1 Kabardino-Balkarian State Agricultural University named after V. M. Kokov, Lenin Avenue, 1V, 360030 Nalchik, Russia
2 Toraighyrov University, str. Lomova, 64, 140008 Pavlodar, Republic of Kazakhstan
* Corresponding author: energo.kbr@rambler.ru
The article covers the results of a theoretical investigation for dung and livestock manure anaerobic fermentation process, substantiated the structural technological scheme and operating modes of the biomethane installation. An investigation complex was carried out on the basis of substantiating the parameters of the technological process, equipment of a biomethane installation, where the goal is to increase the efficiency of substrate processing. Based on the analysis, it was found that the biomethane discharge is one of the main characteristics of processing the substrate, and this moment was taken as the main criterion for optimization work. The rational modes and parameters of the biomethane installation were determined using the mathematical method of planning a multifactorial experiment. The influence of the temperature for the fermentation process of the substrate, the time of mixing the substrate and the number of revolutions of the heat-exchanging mixer on the biogas discharge was established. The influence of design factors, including various factors, was carried out using mathematical statistics and mathematical modeling, where the dependence of the biogas discharge on the temperature of the substrate fermentation process, the time of mixing the substrate and the number of revolutions of the heat exchanging mixer were obtained. The proposed biomethane installation has passed production and laboratory tests in order to optimize the parameters of various capacities for their operation in various regions of the country, the creation of an experimental installation operating in the thermophilic mode, including the stage of preliminary preparation of livestock manure biomass in the technological chain, obtaining liquid and solid fertilizers and other waste-free technology products.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.