| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 01029 | |
| Number of page(s) | 7 | |
| Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
| DOI | https://doi.org/10.1051/e3sconf/202126401029 | |
| Published online | 02 June 2021 | |
Computer simulation the moldboard's surface in simplex system
1 Bukhara branch of Tashkent Institute of Irrigation and Agriculture Mechanization Engineers, Tashkent, Uzbekistan
2 The Bonch-Bruevich St. Petersburg State University of Telecommunications, St. Petersburg, Russia
3 Karshi Engineering and Economic Institute, Karshi, Uzbekistan
4 Namangan Engineering Construction Institute, Namangan, Uzbekistan
* Corresponding author: tojiddin_1968@mail.ru
There are considered the tasks of computer simulation of moldboard's surface in the article. The proposed solution is required in educational, research, and production processes. The researches were carried out using the constructive geometric modeling methods and systems. Objects of computer simulation were chosen the computer models of a directory curve, generative lines, and a frontal contour which are elements of the working surface. The geometric models of working surface elements developed based on research results were implemented in AutoCAD and SIMPLEX systems. The proposed simulation models can reduce the design period, simplify the geometric parameters' setting and facilitate the work of designers.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.