| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 03065 | |
| Number of page(s) | 10 | |
| Section | Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction | |
| DOI | https://doi.org/10.1051/e3sconf/202126403065 | |
| Published online | 02 June 2021 | |
The shutter-automatic machine throughput of the washing device of the water level automatic regulator
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent Uzbekistan
* Corresponding author: mukaddas-gauhar1952@yandex.ru
To determine the throughput of the automatic gate of the flushing device, which is part of the hydraulic automatic water level controller with flexible working bodies, developed by the author together with Ya.V. Bochkarev, experimental studies were conducted. They were carried out by the method of physical modeling of the model and nature on an experimental installation, with the installation of two models of an automatic shutter: a) with a fixed angle of inclination of the pressure board, b) with an automatic shutter in the form of a container consisting of a rigid board under pressure in front of it and a rubberized fabric, as part of an automatic water level regulator. Based on the results of these studies, formulas and dependencies were obtained to determine the flow rates without taking into account and taking into account the lateral outflows and lateral compression coefficients and the water flows passing through the automatic gate.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.