Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 04037 | |
Number of page(s) | 8 | |
Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
DOI | https://doi.org/10.1051/e3sconf/202126404037 | |
Published online | 02 June 2021 |
Intensity of the continuous feed mixing process in the mixer
Karshi Engineering Economic Institute, Karshi, Uzbekistan
* Corresponding author: eeshpulat@umail.uz
The physical basis of the mixture formation is analyzed. The study aims to increase the intensity of the process of continuous mixing of feed in the mixer. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. The design of the mixer cover in the form of a three-sided box is justified, which eliminates additional resistance to the rotation of the screw due to the impact of the feed masses reflected from the cover. When using a lid in the form of a three-sided box, the mixing quality improves by 4-5% and reaches 93% or more at a capacity of 15 t/h. It is established that the optimal angle of inclination of the reflecting plane of the mixing chamber cover is 31-35° with a screw diameter of 400 mm, the height of the reflecting plane from the screw axis of 350 mm, and a rotation speed of 36.61 s-1. The following indicators of the mixer were determined: the productivity that ensures the mixing quality of more than 90% when mixing green mass and silage with mixed feed - 19 t/h, crushed feed root crops with mixed feed-23 t / h, the speed of the screw - 36.61 s-1.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.