Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 04049 | |
Number of page(s) | 8 | |
Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
DOI | https://doi.org/10.1051/e3sconf/202126404049 | |
Published online | 02 June 2021 |
Combination machine for soil cultivation and sowing grain
1 Karshi State University, Karshi, Uzbekistan
2 Karshi Engineering Economic Institute, Karshi, Uzbekistan
* Corresponding author: rmaxamov@mail.ru
The purpose of the study is to substantiate the design scheme and parameters of the working bodies of a combined machine for tillage and sowing grain on sloping lands. The authors have developed a machine that performs technological operations for tillage, grain sowing, and ridge formation to prevent water erosion. The design diagram is given. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. Theoretical and experimental studies have established that using a chisel-shaped ripper with loosening knives as a loosening working body provides high-quality loosening of the soil. When the longitudinal and transverse distances between the rippers are 62.5 and 15 cm, respectively, the longitudinal distance between the rear ripper and the housing is 60 cm, and the transverse distance between the buildings is 90 cm, high-quality soil loosening, and grain sowing are achieved with minimal energy consumption.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.