| Issue |
E3S Web Conf.
Volume 268, 2021
2020 6th International Symposium on Vehicle Emission Supervision and Environment Protection (VESEP2020)
|
|
|---|---|---|
| Article Number | 01023 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/e3sconf/202126801023 | |
| Published online | 11 June 2021 | |
Particle measurement technology based on RDE testing differentiation studies
1 Xiang Yang DA’AN Automobile Testing Center Limited, China
2 China National Institute of Standardization, China
* Corresponding author: donghl@dpac.gov.c
In the vehicle emission test, there are many kinds of measurement equipment for particulate matter, and their measurement principles are also different. By using two kinds of equipment with different principle of particle measurement, the difference of measurement results under the same conditions is compared and the reasons are analyzed. The results show that more particles with particle size less than 50 nm are measured by DC principle, and the concentration of particles with small particle size is higher, so that the PN measurement results using DC principle test are higher than those using CPC principle test results.The measurement results of the CPC and DC principle test equipment during the transient process are very similar, but DC is more sensitive to small-particle particle testing and can test small-particle particles up to 10 nm, so the test concentration is higher than that of CPC.
Key words: emission / particle / DC / CPC
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.