Issue |
E3S Web Conf.
Volume 268, 2021
2020 6th International Symposium on Vehicle Emission Supervision and Environment Protection (VESEP2020)
|
|
---|---|---|
Article Number | 01024 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/e3sconf/202126801024 | |
Published online | 11 June 2021 |
Design of fuel system to meet China 6 emissions requirements in hybrid electric vehicle
Dongfeng Motor Corporation Technical Center, Wuhan, 430058, China
* Corresponding author: qush@dfmc.com.cn
Based on the interpretation of GB 18352.6-2016 and combined with the author's actual development experience, the key design points and solutions of the three key problems of fuel system that meet China 6 emission regulations are described, Technical route selection of evaporative emission, definition of technical route of fuel tank and control strategy of tank pressure, evaporative emission control, etc..
Key words: emission regulations / hybrid power / evaporative emission
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.