Issue |
E3S Web Conf.
Volume 279, 2021
III International Conference “Energy Efficiency and Energy Saving in Technical Systems” (EEESTS-2021)
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 5 | |
Section | Modern Energy Efficient Automation Technology | |
DOI | https://doi.org/10.1051/e3sconf/202127901005 | |
Published online | 01 July 2021 |
End-to-end engineering technologies as resource-saving technologies
Don state technical university, Department “Hydraulics, hydropneumoautomatics and heat management”, 344000, Rostov-on-Don, Russian Federation
* Corresponding author: mariya-kilina@yandex.ru
The article discusses approaches and methods to engineering design in light of INDUSTRY 4.0 technology. Versions of serial and parallel design are described. An analysis of end-to-end design in accordance with INDUSTRY 4.0 technologies is presented, the advantages of this approach to creating complex mechanical engineering facilities are shown. These examples show a reduction in resources and time to develop new design objects. So the use of Wave technology in design allows you to reduce the cost of engineering personnel by 66%, increase iterative procedures while reducing the time of design procedures, reduce the number of elements of the system, without reducing its reliability.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.