E3S Web Conf.
Volume 288, 2021International Symposium “Sustainable Energy and Power Engineering 2021” (SUSE-2021)
|Number of page(s)||7|
|Published online||14 July 2021|
Selection of the optimum device parameters for constant magnetic field generation
Ufa State Petroleum Technological University, 450044, Kosmonavtov street, 1, Ufa, Russia
* Corresponding author: firstname.lastname@example.org
The aim of the work is to develop a device design for creating constant magnetic fields and select its parameters, select an electrical circuit for powering the device and determine how the energy efficiency of the device changes with an increase in its overall dimensions. When solving the problem, the KOMPAS-3D three-dimensional modeling system was used, the magnetic field induction was calculated using the Pascal ABC programming system, the optimal device parameters were selected using the Microsoft Excel program. Calculations have shown that the coefficient taking into account the inhomogeneous distribution of the magnetic field in the device is 0.883. The optimum ratio between the height and the radius of the cylinder, along which the emulsion flows, is h = r √ 20 hr. Using the KOMPAS-3D three-dimensional modeling system, a model of the device under development was built taking into account the obtained relationships. When using a circuit with an uncontrolled rectifier and autotransformer, the power consumed by the device is 2.67 times lower than the power consumed by the device when using a circuit with a controlled rectifier and a transformer. Energy efficiency increases significantly with the increase in device performance.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.