| Issue |
E3S Web Conf.
Volume 288, 2021
International Symposium “Sustainable Energy and Power Engineering 2021” (SUSE-2021)
|
|
|---|---|---|
| Article Number | 01070 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202128801070 | |
| Published online | 14 July 2021 | |
Investigation of the Algorithm to Find Defects in High-voltage Insulators for an Automated Thermal Imaging Control System
1 OOO «GDC Services», Kazan, Russia
2 Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: dzaripov@list.ru
This paper describes a software algorithm for detecting defective insulating structures using infrared images. The defect detection criteria are based on a joint analysis of the mean and standard value of the brightness distribution of a set of insulators. The effectiveness of the developed criteria is substantiated by the results of laboratory tests of a significant number of insulators removed from high-voltage lines according to the results of thermal imaging diagnostics. Simultaneous analysis of thermograms of the same type of insulating structures according to the proposed algorithm is more effective in comparison with the subjective assessment of each of them separately, which was used earlier. In addition, this approach allows to reduce the time of analysis and decision-making based on the results of diagnostics.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.