Issue |
E3S Web Conf.
Volume 124, 2019
International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|
|
---|---|---|
Article Number | 03003 | |
Number of page(s) | 5 | |
Section | Automation, Instruments and Control Methods | |
DOI | https://doi.org/10.1051/e3sconf/201912403003 | |
Published online | 25 October 2019 |
Automatic condition monitoring method to find defects in high-voltage insulators using infrared images
Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: alina17@bk.ru
In recent years, infrared imaging has become an important tool, particularly for predicting and preventing electrical equipment failure. Systems for online monitoring of the equipment conditions used in electrical substations are based on computer vision algorithms to perform visual analysis, automatically detect and assess equipment condition. This article describes a developed method that automatically finds defects in high-voltage insulators using infrared images. This method is based on the Otsu method, which is one of the most popular and effective segmentation methods that can be applied to finding defects in infrared images. The result is a comparative analysis of computer vision methods in infrared images used in our research. Automatic condition monitoring to find defects in high-voltage insulators in infrared images can be considered as the base method for an automated thermal imaging system for monitoring electrical substation equipment.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.