| Issue |
E3S Web Conf.
Volume 288, 2021
International Symposium “Sustainable Energy and Power Engineering 2021” (SUSE-2021)
|
|
|---|---|---|
| Article Number | 01105 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/202128801105 | |
| Published online | 14 July 2021 | |
Development of an automated control system for 6/0.4 kV transformer substation with automatic transfer switch using standard IEC 61131-3
1 Vologda State University, 160000 S. Orlov St. 6, Vologda, Russia
2 Kazan State Power Engineering University, Kazan, Russian Federation
This work is devoted to the development of an automated transfer switch (ATS) for the 6/0.4 kV substation. The work is relevant due to the introduction of automation and the replacement of electromechanical equipment with microprocessor devices in the power systems. At the lower (field) level, automation is driven by the use of programmable logic controllers (PLCs) and various smart sensors. The possibility of using modular PLC in automation systems is considered. Developed are an algorithm and a program for the implementation of automated regulation of the application of automatic transfer switches at a substation using the recommendations of the IEC 61131.3 “Programming languages of programmable logic controllers” standard.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.