| Issue |
E3S Web Conf.
Volume 323, 2021
V International Scientific and Technical Conference Modern Power Systems and Units (MPSU 2021)
|
|
|---|---|---|
| Article Number | 00029 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202132300029 | |
| Published online | 10 November 2021 | |
Innovative combined in-cycle trigeneration technologies for food industries
1 Admiral Makarov National University of Shipbuilding, 9 Heroes of Ukraine Avenue, Mykolayiv, Ukraine
2 Gdańsk University of Technology, 11/12 Gabriela Narutowicza Street, 80-233 Gdansk, Poland
* Corresponding author: nirad50@gmail.com
The majority of integrated energy systems (IES) for combined electricity, heat and refrigeration generation, or trigeneration, are based on gas engines. The fuel efficiency of gas engines are strictly influenced by intake air temperatures. Practically in all IES the absorption lithium-bromide chillers (ACh) are applied for conversing the heat removed from the engine into refrigeration in the form of chilled water. The peculiarity of trigeneration in food industries is the use of chilled water of about 12°C for technological needs instead of 7°C as typical for ACh. This leads to a considerable great potential of engine intake air deeper cooling not realized by ACh, that can be used by ejector chiller (ECh) as the low temperature stage of two-stage absorption-ejector chiller (AECh) to provide engine cyclic air deep cooling and enhancing engine fuel efficiency. To evaluate the effect of gas engine cyclic air cooling the data on fuel consumption and power output of gas engine JMS 420 GS-N.L were analyzed.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.