Issue |
E3S Web Conf.
Volume 323, 2021
V International Scientific and Technical Conference Modern Power Systems and Units (MPSU 2021)
|
|
---|---|---|
Article Number | 00032 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202132300032 | |
Published online | 10 November 2021 |
New calculation method for tube cross-flow heat exchangers
Cracow University of Technology, Faculty of Environmental Engineering and Energy, ul. Warszawska 24, 31-155 Cracow, Poland
* Corresponding author: katarzyna.weglarz@pk.edu.pl
A new method for thermal calculations of the cross-flow tube heat exchangers was proposed. The temperature of both fluids and the wall temperature are determined. The heat exchanger is divided into control volumes, in which outlet fluid temperatures are calculated by closed analytical formulas. Two examples of the application of the method for the calculation of two-pass cross-co-current and cross-countercurrent superheaters were presented. An exact analytical model was also developed for both superheaters to estimate the accuracy of the proposed method. The results of the superheater calculations using the developed method are in good agreement with the results obtained by the exact analytical models. The proposed method can be used to calculate heat exchangers with a complicated flow system in which the physical properties of fluids are temperature-dependent.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.