E3S Web Conf.
Volume 338, 20227th International Conference on Environmental Science and Material Application (ESMA 2021)
|Number of page(s)||6|
|Published online||20 January 2022|
Effect of pyrolysis temperature on adsorption and degradation of THI and IMI by biochar
College of modern agricultural engineering, Kunming University of Science and Technology, Kunming 650500, China
* Corresponding author: email@example.com
In order to explore the effects of biochar prepared at different pyrolysis temperatures and different solid-liquid ratios on the adsorption and degradation of thiacloprid and imidacloprid in biochar, three biochar were prepared by oxygen pyrolysis with sawdust and as raw materials at 300, 500 °C and 600 °C respectively. The effects of biochar on the adsorption degradation of thiacloprid and Imidacloprid in biochar were studied. The results showed that the addition of biochar could significantly increase the soil pH, available phosphorus and organic carbon content, and reduce the soil H / C. The addition of biochar significantly improved the adsorption of thiacloprid and imidacloprid, and the adsorption capacity increased with the increase of biochar pyrolysis temperature. Biochar with different pyrolysis temperatures had different effects on the degradation of thiacloprid and imidacloprid. The strong adsorption capacity of high temperature biochar system reduces the chemical degradation rate of thiacloprid and imidacloprid. Proper solid-liquid ratio can avoid the waste of adsorbent and achieve the optimal utilization rate. Therefore, the types and properties of biochar should be fully considered when using biochar to repair pesticide contaminated soil.
Key words: Biochar / THI / IMI / adsorption / degradation
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.