Issue |
E3S Web Conf.
Volume 362, 2022
BuildSim Nordic 2022
|
|
---|---|---|
Article Number | 09003 | |
Number of page(s) | 6 | |
Section | Design and Performance | |
DOI | https://doi.org/10.1051/e3sconf/202236209003 | |
Published online | 01 December 2022 |
Heat recovery ventilation system heating energy weather normalization – calculation method and case study
1 FinEst Centre for Smart Cities (Finest Centre), Department of Civil Engineering and Architecture, Tallinn University of Technology, Tallinn, Estonia
2 Aalto University, School of Engineering, Department of Civil and Structural Engineering, Helsinki, Finland
* corresponding author: helena.kuivjogi@taltech.ee
Today, we have measured energy consumption or used data from utility bills and standard weather normalization methods (heating degree days (HDD)) to easily calculate the energy performance certificate (EPC) for existing building. However, normalization methods must be upgraded to be more accurate for weather. This study uses analytical model for weather normalization of air handling unit heating consumption. The models derived from measurements of the ventilation system in a real building were conducted and the normalization aspects were analysed. A new analytical weather normalization calculation method for ventilation heating is compared with heating degree day normalization.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.