E3S Web of Conf.
Volume 365, 2023IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
|Number of page(s)||9|
|Section||Mechanization, Electrification of Agriculture and Renewable Energy Sources|
|Published online||30 January 2023|
Technology of hardening surfaces of working bodies by electromechanical processing
“Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, Uzbekistan
* Corresponding author: firstname.lastname@example.org
The article presents the results of research on technology development and substantiation of the modes of strengthening the working surfaces of earth-moving machines by the electromechanical method. The types of wear and the appearance of defects on the working surfaces of the part are analyzed, taking into account the operating conditions. Based on the conducted studies on the study of surface wear, the arithmetic mean values were determined using the example of a plowshare of a bulldozer blade. A technology for restoring a part with subsequent electromechanical hardening has been developed. The influence of processing modes on the surface hardness was studied, and using a multifactorial experiment, a regression equation was identified, and optimal hardening modes were substantiated.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.